close
標題:

流明等如lux

發問:

流明等如lux

最佳解答:

唔同! Lux = 流明 / 區域面積(平方米). 詳情自己慢慢睇啦. Lux versus lumen The difference between the lux and the lumen is that the lux takes into account the area over which the luminous flux is spread. 1000 lumens, concentrated into an area of one square metre, lights up that square metre with an illuminance of 1000 lux. The same 1000 lumens, spread out over ten square metres, produces a dimmer illuminance of only 100 lux. Achieving an illuminance of 500 lux might be possible in a home kitchen with a single fluorescent light fixture with an output of 12000 lumens. To light a factory floor with dozens of times the area of the kitchen would require dozens of such fixtures. Thus, lighting a larger area to the same level of lux requires a greater number of lumens. 流明 (符號: lm) 是光通量的SI國際單位,它是人眼感知的光能的量度。發光通量與輻射通量不同,輻射通量是發光總能量的量度,而發光通量則對人眼對不同波長光的敏感程度不同做了相對調整。 定義 1 lm = 1 cd·sr = 1 cd·m2·m–2 解釋 如果一個光源發射一坎德拉的照度到一個具有一立體弧度固體角的方向里,則到那個固體角的總發射光通量就是一流明。或者說,一個各向同性的一坎德拉光源發射的總光通量為4π流明。流明明顯可被認為是對可見光總"量"的測量。 一個標準100瓦特白熾燈在世界220V地區大約發射1300流明而在北美大約1700流明。對各種不同電光源特徵效率,參見光效能。 美國國家標準流明 投影儀(包括視頻投影儀)輸出的光通常是用流明(lumen)來衡量的。美國國家標準學會制定了一個測量投影儀的標準程序。這個程序在不同位置(對投影儀)進行測量並取其平均值。作為市場用途,通過這個程序測得的投影儀光通量可能會注明為「ANSI流明」,從而和用其他方法測量的儀器區別開。在投影儀工業中,ANSI的流明測量法要比其他的測量方法準確。通過這個指標,投影儀之間基於亮度規格的比較更加方便。 國際標準光度量學單位制 [edit] SI photometry units Quantity Symbol 國際單位制 Abbr. Notes 光能 Qv 流明 秒 lm·s 光通量 F 流明 (= cd·sr) lm 也被稱作luminous power 照度(發光強度) Iv 坎德拉 (= lm/sr) cd 一個SI基本單位 亮度 Lv 坎德拉每平方米 cd/m2 單位有時被稱作nits 施照度(照明度) Ev lux (= lm/m2) lx 用於表面入射光 發光度 Mv lux (= lm/m2) lx 用於從表面發出的光 光效能(發光功效) 流明每瓦特 lm/W 光通量與輻射通量的比值;最大為683.002 勒克斯是一个标识光强度的国际单位制单位,1個光量根據1平方米面積,就是1勒克斯。

其他解答:

免費註冊體驗

 

此文章來自奇摩知識+如有不便請留言告知

arrow
arrow

    szw52ts91l 發表在 痞客邦 留言(0) 人氣()